Angle steel transmission tower has the advantages of excellent performance, wide range of use, high strength of connecting rod bolt, so it is necessary to inspect relevant manufacturers to ensure its quality. Tangent tower, tension tower and crossing tower are common angle steel towers, and their applications are different due to their different performances. Only by deeply understanding the characteristics of various angle steel transmission towers can their advantages be brought into play. What kinds of angle steel transmission tower are there?

Tension tower

Tension tower is a kind of low high angle steel transmission tower. This is a kind of bearing tower. In case of accident, the influence range of fault line can be limited, and the suspension point of conductor will not be displaced.

Linear tower

Vertical tower, also known as vertical tower, is suspended by insulator string. There are three kinds of single suspension, double suspension and V-shaped suspension. The straight-line tower has small material and body slope, light tower body, less joint bolts, only bearing horizontal wind load and vertical load, and the tower can be allowed to tilt under unbalanced tension.

Crossing tower

Compared with the ordinary straight tower, the structure of the tower is complex, the tower height is higher, and the tower weight is about 50-200 tons. Both sides of the tower can be seen whether crossing the highway, railway or river valley, or crossing the river. The load and hanging line of the tower are similar to those of the straight tower, but the load is relatively large. If the line requires high Anquan degree, it needs to cross the tower.